Fitness racing floors · Designed & patented in Germany

Every surface fitness racing needs.

Create the Fitness Racer’s best training ground

Turf for sled push and pull, carpet fleece for burpees, rubber flooring for the equipment — and the lighting that ties it together. We develop each of these surfaces ourselves, in Germany.

Floors for the best HYROX athletes in a motivating gym setting that inspires — that is our goal at fiorsports. From Dubai to FIBO in Cologne: with 14 filed IP rights and the secret to the optimal sled push/pull surface, we create fitness racing gym concepts for athletes.

fiorsports training floors in use.

Five products, one floor

What a fitness racing floor looks like

Three surfaces and two lighting layers — available separately, engineered to work together. Tap a number in the plan to jump to that product.

Configure your floor now

Dimensions or a floor plan are enough — we'll come back with an assessment.

01 Engineered for sled push & pull

MYtrainingclub — the turf fitness racing is trained on

We developed the turf fibre structure for competition-grade sled training — tested with thousands of athletes, installed in gyms worldwide, and equally suited to HYROX training. Optimal fibre density, friction coefficient optimised for push and pull, no deformation, no maintenance.

  • Fibre height 12–15 mm, density 300–320 stitches/m
  • Friction coefficient optimised separately for push and pull
  • Dimensionally stable without infill — no aftercare
  • Made to measure with studio logo and distance markings

Typical area in the plan 16,1 × 6 m

Sled pull force Test: sled pull · men open · 152 kg
Pull force compared across three surfaces Tolerance band of plus minus ten percent around the HYROX reference of 523 newtons. MYtrainingclub falls inside at 486 newtons, standard turf falls outside at 434 newtons. Acceptable · ±10 % HYROX reference 523 N 523 N 486 N 434 N HYROX racing carpet MYtrainingclub Standard turf −7 % −17 %

The ±10 % tolerance band is oriented on HYROX competition conditions. MYtrainingclub sits inside it at −7 % — standard turf falls outside at −17 %.

Configure your training floor

Athlete performing a sled push on blue MYtrainingclub HYROX turf in a gym
Sled on MYtrainingclub turf with start marking for HYROX sled push

02 In development Carpet fleece for burpee training

MYburpeezone — the burpee lane that spares your skin

A fine-pile, soft surface for burpees performed shirtless or in shorts — without skin irritation. Easy to clean wet or dry. Integrated cushioning absorbs the landing and protects joints across high repetition counts.

  • Fine-pile fleece — no abrasion on skin or clothing
  • Soft underlayer cushions the landing
  • Wet and dry cleanable, antibacterial finish
  • Layable as one continuous lane across the full studio width

Typical area in the plan 20 × 2 m

Early-access list for MYburpeezone

We'll only write at launch. No newsletter, unsubscribe any time.

Configure your training floor

Close-up of the fine-pile MYburpeezone surface with LED edge

03 Rubber flooring for the equipment area

MYecotile — the floor that carries the equipment

Rubber tiles for the stations where weight stands and falls: SkiErg, RowErg, wall balls and treadmills. Hard-wearing, non-slip and quiet — made from secondary raw materials and laid without adhesive.

  • Built for SkiErg, RowErg, wall balls and treadmills
  • Absorbs impact and cuts structure-borne noise in the gym
  • Made from secondary raw materials — loose-laid, no adhesive
  • Hexagon and rectangular formats, cut to fit the floor area

Configure your training floor

MYecotile hexagon rubber tiles as a training floor
Gym floored with MYecotile rubber tiles

04 Light in floor and wall

MYsmartzone — every zone, every interval, made visible

Sensor-driven lighting, built into MYecotile on the floor and into light bars along the wall. Synchronised via radar zone detection, it shows intervals from 30 seconds to 5 minutes in light — for circuits, station work or whole training blocks.

Why this matters in station training

Fitness racing rotates across stations — HYROX training works the same way. MYsmartzone makes that rotation visible: in group sessions coaches see at a glance which station is running, which is free and how much of the interval is left.

  • Radar zone detection — responds to movement, not cameras
  • Intervals from 30 seconds to 5 minutes, freely programmable
  • Zone occupancy flaggable in colour for 40–60 minutes
  • Floor and wall in sync — one system, two planes

14 IP rights filed Designed & patented in Germany — 14 filed IP rights, including a DPMA patent family for LED floor integration.

Configure your training floor

MYsmartzone wall lighting showing training zones in colour
MYsmartzone wall lighting showing training zones in different colours
Illuminated training station with MYsmartzone zone indication in blue

05 Running light in the turf

MYtrainingclub PRO — your pace, visible in the floor

MYtrainingclub turf with an integrated running light. A wave of light travels the lane in real time and sets the target pace for sled push — faster, slower, steady. The athlete sees the light and does not need to look at a screen, phone or wrist. Coaches see instantly who is holding rhythm.

  • Running light built directly into the turf lane
  • Real-time pace setting, steplessly adjustable
  • Colour-coded target zones — on pace or off it
  • Preset programmes callable directly at the lane

The same lighting technology as MYsmartzone — here built into the lane rather than the room.

Configure your training floor

MYsmartzone light wave running as an LED line beside the artificial turf sled push lane
Runner on an illuminated training lane, LED edge setting the pace
Controlling the MYsmartzone running lights with preset pace programmes

Two routes to a floor

All turf, or mixed surfaces?

Both work — they differ in look, flexibility and how easily lighting can be integrated. We advise from your floor plan which fits better.

Training area fully covered in artificial turf with white lane markings

Concept A

All turf

One continuous MYtrainingclub surface, with only the burpee lane laid separately.

  • A single homogeneous surface — instantly readable as the training area and easy to brand
  • Equipment can be moved freely, because the whole floor sits at one height
  • One surface for every exercise — not optimised zone by zone
  • Repurposing later means swapping larger sections

Not sure which fits? Send us your floor plan — we'll draw up both options and cost them out.

Every surface.
One partner.

Turf, carpet fleece, rubber, light — four material worlds, one point of contact. We advise on the right surface per zone, manufacture it in Germany and integrate the light control on request.

The partner for fitness racing floors — material expertise, sensors and software from one source.

As featured in

  • stern
  • FIBO
  • bodyLIFE
  • Bundesliga Magazin
  • DIFG

Awards & certifications

  • FIBO Innovation & Trend Award — nominated 2023 FIBO Innovation & Trend Award
    Nominated 2023
  • BSFZ seal for certified research and development 2025 BSFZ seal
    Research & development 2025
  • Entrepreneur of the Future seal, German Innovation Institute Entrepreneur of the Future
    German Innovation Institute

Studios that train with us

References

“The surface offers excellent traction and grip, reducing the risk of slips and falls during dynamic movements. Whether you're performing sprints, agility drills, or weightlifting exercises, the consistent and level playing field provided by gym turf promotes stability and helps optimize your performance.”
Greg BoucherCEO, MeFitPro
“fiorsports developed a high-quality turf for us that can simply be retrofitted into a gym — no installation required.”
Marcel & ChristianSKILLCOURT GmbH
“For the reopening of one of our studios we urgently needed a speed track, on schedule. I came across fior online and was given straightforward, friendly and competent advice. A few days later, right on time for the reopening, we were able to lay the turf. And the quality? Simply outstanding!”
Riccardo DanubioFitness 5|24 Widnau
fiorsports training floor in a modern fitness studio

About us

Not a sporting goods brand — an engineering team.

A German family business bringing together material science, sensors and software to rethink the training floor. Led by Laaya & Dr Tilman Sauter, with 14 filed IP rights at the German Patent and Trade Mark Office and certified research and development activity (BSFZ).

  • Development and fabrication in Germany
  • 14 filed IP rights, including our own patent family for LED floor integration
  • Recycled yarns and secondary raw materials wherever technically possible

Laaya & Dr. Tilman SauterManagement, fior Familie GmbH

Frequently asked

Fitness racing floors — answered briefly

What makes a good fitness racing floor?

A competition-grade floor has to do three things at once: deliver constant friction for sled push and sled pull, stay dimensionally stable under daily load, and offer a surface that allows burpees and floor work without skin irritation. The fibre structure decides this — not the look. The same requirements apply to HYROX training.

Is artificial turf better than rubber flooring for sled push?

For sled push and pull, yes. Rubber floors either create too much resistance or wear locally under the runner. Turf engineered for sled training delivers a consistent friction coefficient across the full lane and does not deform. For strength areas with barbell loads, rubber — such as MYecotile — remains the right choice.

What does a fitness racing floor cost for a gym?

Price depends on lane length, width, fabrication and whether MYsmartzone is integrated. A typical sled lane sits at X,XXX–XX,XXX €. We calculate every floor individually — dimensions and a floor plan are enough for a quote within X working days.

How does the light control work without an app?

MYsmartzone uses radar zone detection with programmes stored on the system. Pace, interval and zone occupancy are called up directly at the surface. A tablet is optional for setup — in daily operation neither athlete nor coach needs a device in hand.

How long do delivery and installation take?

Standard fabrications ship in X–X weeks. The lanes lie loose — no glue, no substructure. A typical sled lane is ready to use in under a day. MYsmartzone installations are planned with the studio in advance.

Is fiorsports an official HYROX partner?

No. fiorsports is not an official HYROX sponsor and does not offer official HYROX products. We are the manufacturer that engineered the turf for sled training and equips gyms worldwide — including many where people train for HYROX. Sponsorship and product development are two different things; we stand for the latter.

A two-minute enquiry

Configure your training floor

Tell us what you're interested in — we'll come back with a concrete assessment of area, fabrication and price.

What are you interested in?

We use your details solely to handle your enquiry. See our privacy policy for details.

Rather write directly? info@fiorsports.com

We are not the official HYROX sponsor — but we are the ones who worked out the secret recipe for the right HYROX sled surface friction.

Call us